ZYPHO® transfers heat from the shower’s wastewater
(40º) to the incoming cold mains (10º) supply. This preheated water (up to 33º)
is then directed to either the shower mixer, the water heater or, preferably
both - reducing energy consumption
Improving Energy
Efficiency up to 75% Every 3 showers, 2 are for free
no power
no wires
Efficient Solutions
Zypho® offers shower drain heat recovery systems leading to energy savings and reducing carbon footprint, without compromising the aesthetics of your space.
Upgrade the shower experience by reusing the energy going down the drain.
Simple and efficient. With an easy installation by any plumber.
Configurator
Vertical Solution
Horizontal Solution
Zypho® S|im50 | 50% efficiency
Brevemente
Specs
Elegant. Efficient. Simple AVAILABLE JUNE 2023
×
Zypho® S|im50
50 mm high - The SLIMMEST unit on the market
Reuses 50% of the thermal energy of shower water
Simple to fit, no maintenance
Fits any shower or bathtub tray
Invisible
Zypho® Slim50 is the slimmest system on the market, with 50% energy efficiency – the highest of any multi-fit WWHR system.
At just 50mm high, it's slim enough to fit comfortably over any shower tray, bathtub or linear drain. Once installed, it immediately starts paying for itself, providing a great bathing experience while saving energy and CO2 emissions.
Simple for any plumber to install and maintenance free.
S|im reuses the heat from water wasted in the shower (40º) to preheat the cold water coming from the mains (from 10º to 26º) - reducing the energy consumption required for a comfortable shower - Energy efficiency is up to 50%.
The system is according to the EN1717 standard.
PREVENTION OF LEGIONELLA The design of the Zypho®S|im minimizes Legionella-related risks:
The drain water never stays inside the unit for a long time, as its construction ensures that the water is drained at the end of each bath. After bathing, the water cools down to less than 25ºC, as recommended by the WHO and the European Working Group on Legionella Infections. S|im systems are installed relatively close to the shower faucets to minimize the distance between the unit and the shower valve.
MAINTENANCE The performance and guarantee of the Zypho® S|im require the installation of the respective valves and filters. Zypho® Heat Recovery Units have been designed in such a way that they do not require maintenance efforts. They must be installed with the Zypho® valve. Periodic cleaning is recommended to optimize efficiency. Use a non-corrosive plunger or water jet. We recommend the ZYMN00000J1 waterjet brush.
Brochure
Specs
Brevemente
Zypho® iZi40 | <39% efficiency
Buy
Specs
Copper | Eco Shower | All Buildings
iZi40
×
Zypho® iZi40
ZYPHO iZi transfers heat from the shower’s waste water (40º) to the incoming cold mains (10º) supply. This preheated water (up to 23º) is then directed to either the shower mixer, the water heater or, preferably both - reducing energy consumption from 25% to 39% - Improving Energy Efficiency. Every three showers, one is for free.
Zypho® iZi has several installation options - see range - with efficient waste trap filters. Zypho® iZi requires minimal maintenance and can be installed in new or retrofitted buildings.
Simple and efficient. With an easy installation by any plumber, ZYPHO® offers shower drain heat recovery systems leading to energy savings and reducing carbon footprint, without compromising the aesthetics of your space.
Drain water never stays inside the unit for a long time, since the construction guarantees that it is fully drained out at the end of every shower.
After the shower, the cold water cools down to less than 25°C, as recommended by the WHO and the European Working Group for Legionella Infections.
Since iZi 30 High Flow | iZi 40 Eco Shower is installed relatively close to the shower tap, the distance between the unit and the shower trap is minimized.
MAINTENANCE Zypho® iZi performance and warranty requires the installation of Zypho® traps & filters. Select from zypho’s range. Zypho® iZi Heat Exchangers have been designed to require minimal maintenance efforts. They must be installed with the shower drain provided. Periodic cleaning is recommended to optimise energy exchange. Use a non-corrosive drain cleaner or a water jet. We recommend our non-corrosive biological drain cleaner with the reference ZYMN00000C1 or our water jet brush ZYMN00000J1.
Brochure
Specs
Buy
Brochure
Vertical Solution
Horizontal Solution
Zypho® PiPe DW | <64% efficiency
Buy
Specs
Stainless Steel | Double Wall | 2+ storey building
PiPeDW
×
Zypho® PiPe DW
PiPe DW is a vertical shower drain heat recovery solution adaptable to shower trays, linear drains or bathtubs, with a flow drainage recommended up to 12,5L/min, able to deliver energy savings up to 64%. It transfers heat from the shower’s hot waste water to the incoming cold mains supply. This preheated incoming mains water is then directed to either the shower mixer, the water heater or, preferably, both. According with EN1717.
The Zypho® PiPe DW requires minimal maintenance and can be installed in new or retrofitted buildings.
Simple and efficient. With an easy installation by any plumber, ZYPHO® offers shower drain heat recovery systems leading to energy savings and reducing carbon footprint, without compromising the aesthetics of your space.
Drain water never stays inside the unit for a long time, since the construction guarantees that it is fully drained out at the end of every shower.
After the shower, the cold water cools down to less than 25°C, as recommended by the WHO and the European Working Group for Legionella Infections.
Since Zypho® PiPe is installed relatively close to the shower tap, the distance between the unit and the shower trap is minimized.
MAINTENANCE Zypho® PiPe Heat Exchangers have been designed to require minimal maintenance efforts. Periodic cleaning is recommended to optimise energy exchange. Use a non-corrosive drain cleaner or a water jet. We recommend our non-corrosive biological drain cleaner with the reference ZYMN00000C1 or our water jet brush ZYMN00000J1.
Brochure
Specs
Buy
Zypho® PiPe | <75% efficiency
Buy
Specs
Stainless Steel | 2+ storey building
PiPeSW
×
Zypho® PiPe
PiPe is a vertical shower drain heat recovery solution adaptable to shower trays, linear drains or bathtubs, with a flow drainage recommended up to 25L/min, able to deliver energy savings up to 75%. It transfers heat from the shower’s hot waste water to the incoming cold mains supply. This preheated incoming mains water is then directed to either the shower mixer, the water heater or, preferably, both.
The Zypho® PiPe does not require maintenance and can be installed in new or retrofitted buildings. Simple and efficient. With an easy installation by any plumber.
ZYPHO® offers shower drain heat recovery systems leading to energy savings and reducing carbon footprint, without compromising the aesthetics of your space.
LEGIONELLA PREVENTION Zypho® Systems design minimizes Legionella-related risks: Drain water never stays inside the unit for a long time, since the construction guarantees that it is fully drained out at the end of every shower. After the shower, the cold water cools down to less than 25°C, as recommended by the WHO and the European Working Group for Legionella Infections. Since Zypho® PiPe is installed relatively close to the shower tap, the distance between the unit and the shower trap is minimized.
MAINTENANCE Zypho® Heat Exchangers have been designed to not require maintenance. Periodic cleaning is recommended to optimise energy exchange. Use a non-corrosive drain cleaner or a water jet. We recommend water jet brush ZYMN00000J1.
Brochure
Specs
Buy
Brochure
Why ZYPHO?
≤ 12% SAP benefit with the best price-performance
Up to 75% energy efficiency
No power No batteries No wires
Adaptable to shower trays, linear drains or bathtubs
Easy to install
Over 20 000 installations around the world
German Tech Made in Portugal
Legionella free
Savings
About us
Mission
Vision
About us
The day will come when a Shower Drain Heat Recovery will be a commodity.
We believe ZYPHO® is taking a serious part in this progress.
Zypho® is a company that develops, produces and markets products and
solutions that enhance the comfort of the shower and substantially
reduce energy consumption. Through Zypho® systems, the company has
become the leader in the industry of shower heat recovery systems that
contribute to improve the energy efficiency of housing.
Zypho® is present in more than 15 countries and has been building solid
partnerships with high-profile distributors and partners covering the
UK, Scandinavian, Central and Northern European markets, as well as
Brazil, South Africa and the Australian markets.
About us
Mission
Vision
Frequently Asked Questions
START SIMULATING PAYBACK
How much energy can be saved by installing a Zypho®?
The savings are pretty significant: anything from 30% to 75%, depending on the application.
Does Zypho® need regular cleaning, and is there a risk of clogging?
No cleaning required and Zypho®'s built in drain sump filter removes the risk of clogging. All you'll need is a regular 6-monthly drain cleaner to keep everything working perfectly.
How to install a Zypho®?
Easy! Anyone familiar with basic plumbing or any plumber, can fit one. No specialist labour required.
Does the Zypho® need a power source or batteries to operate?
No, not at all! It's self contained, and it contains no moving parts.
Reference Projects
Isle of Man,Douglas,
Premier Inn Hotel - Developer,
Dandara
United Kingdom,United Kingdom, Birmingham,
Ridley House
Portugal,Orbitur, Holiday Home
The Netherlands, Rotterdam,Rotterdam Market Hall
The Netherlands,Apeldoom Cityside
Brazil,São Paulo Social Homes, Program
Certifications
Contacts
Factory: Zona Industrial do Montijo, Arm n.º 24, EN 5 Pau Queimado 2870-500 Afonsoeiro Montijo Portugal.